• 12v 20amp Ctek D250SA B2B Battery to Battery charger wiring Kit Ready Made Leads

12v 20amp Ctek D250SA B2B Battery to Battery charger wiring Kit Ready Made Leads

Wiring kit for simple instalation for 20amp CTEK style battery to battery charger
It is recommended to install the charge as close to the leisure battery as possible.
Supplied with pre crimped leads made to measure
Simply select from the menus
( LEAD A) main lead from the starter battery to the charger
(LEAD B) Main lead from charger to the leisure battery(s)
Very simple to connect and install with only three main connections

Starter battery to charger
Charger to leisure battery
Common Earth

Supplied with

  • 1 x 250mm 10mm 70amp Red lead with M8-M6 terminals for starter battery to fuse holder
  • 1 x (A LEAD) selected above 10mm2 70amp Red lead with M6 to M8 terminals for fuse holder to charger
  • 1 x (B LEAD) selected above 10mm2 70amp Red lead with M8 to M6 terminals for charger to fuse holder
  • 1 x (B LEAD) selected above 10mm2 70amp Black lead with M8 to M8 terminals for charger to earth/leisure battery
  • 1 x 250mm 10mm2 70amp Red lead with M6 to M8 terminals for fuse holder to leisure battery
  • 1 x 1000mm 10mm2 70amp Black lead with M8 to M10 terminals for your leisure battery earth
  • 2 x strip link fuse holders with 30amp midi fuses + a spare
  • Positive and negative 8mm post type battery terminal
  • Spare copper tube terminals + heat shrink for any modifications
  • 15 x cable ties + 10 x adhesive cable tie bases
  • 2 x sticky pads
  • 15 x screws + drill bit
  • split conduit to protect cables

We can also supply this kit as a simple cable and component kit if required supplied with everything needed to make up the kit yourself

Simply select the best length kit to suit your needs and add a note in the check out page for us to adjust your order


Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

12v 20amp Ctek D250SA B2B Battery to Battery charger wiring Kit Ready Made Leads

  • Product Code: D250SE/FKRM
  • Availability: 10
  • £45.00

  • Ex Tax: £37.50

Available Options


Related Products

Flat Twin Core Automotive Cable 2mm 25amp (Thin Wall)

Flat Twin Core Automotive Cable 2mm 25amp (Thin Wall)

Flat Twin Core Automotive Cable 2mm 25amp (Thin Wall) Top quality British made Twin Core Cable ..

£1.80 Ex Tax: £1.50

Piggy Back Standard Blade Fuse Holder with Flying Lead

Piggy Back Standard Blade Fuse Holder with Flying Lead

Piggy Back Blade Fuse Holder with Flying Lead for additional circuit An easy way to provide ..

£3.02 Ex Tax: £2.52

Piggy Back Mini Blade Fuse Holder with Flying Lead

Piggy Back Mini Blade Fuse Holder with Flying Lead

Piggy Back Blade Fuse Holder with Flying Lead for additional circuit An easy way to provide ..

£3.02 Ex Tax: £2.52

Sunpower 110 watt Flexible Solar Panel Systems XX WITHOUT REGULATOR XXX

Sunpower 110 watt Flexible Solar Panel Systems XX WITHOUT REGULATOR XXX

Sunpower Flexible Solar Panel Systems High Power and Flexible Kit designed to go alongsi..

£300.00 Ex Tax: £250.00

Blade Fuse box kit with Negative Bus Bar + 70amp Cable + Mixed Fuses & Terminals

Blade Fuse box kit with Negative Bus Bar + 70amp Cable + Mixed Fuses & Terminals

Blade Fuse box with twin positive bus bars + negative bus bar supplied with 1mtr Red + 1mtr Black ..

£40.00 Ex Tax: £33.33

Piggy Back Micro2 Blade Fuse Holder with Flying Lead

Piggy Back Micro2 Blade Fuse Holder with Flying Lead

Piggy Back Micro2 Holder with Flying Lead for additional circuit An easy way to provide an e..

£3.02 Ex Tax: £2.52

Twin Sunpower 110w Flexible Solar Panel Systems XX WITHOUT REGULATOR XXX

Twin Sunpower 110w Flexible Solar Panel Systems XX WITHOUT REGULATOR XXX

Sunpower Flexible Solar Panel Systems High Power and Flexible Kit designed to go alongsi..

£550.00 Ex Tax: £458.33