• Sunpower Flexible Solar Panel Systems with CTEK D250SE Battery to Battery Charger

For the best leisure battery charging solution for your vehicle supplied with the CTEK D250SE 12v 20amp battery to battery charger + Sunpower 110w flexible solar panel and fitting kit

Ctek D250SE

With award winning Swedish technology, the dual input D250SE which has now replaced the D250SA with added

connection to lithium batteries can draw its power from smart alternators andother DC sources, making it the ideal

charger for vehicles that have access to a mains power supply. Its dual input capability means it can draw

power from solar and wind sources, in parallel to the alternator.

The D250SE is a fully automatic, 5 step charger that supplies up to 20A of power to charge, condition and

maintain any 12V lead acid service battery from 40-300Ah, including Wet, MF, Gel, AGM. EFB and Ca/Ca & lifepo4 Lithium.

The D250SE uses patented technology so its safe for you and your vehicles electronics. Its also IP65 classified

(splash and dust proof, and suitable for outdoor use) and comes with a 2-year warranty.

Sun Power SPR-E-FLEX110

Made with SunPowers highest power Gen II back contact cells, SunPowers flexible panels deliver the highest power output and the highest charging capacity in their product class. SunPowers panels are constructed with top-grade, light-weight polymer materials, allowing for easy transport, installation and panel flexing up to 30 degrees.

Designed for Toughness The SunPower Maxeon Solar Cell is the only cell built on a solid copper foundation. Flexible panels made with SunPower cells are resistant to power loss via cracking and corrosion, unlike conventional cells, which are much more likely to lose power when bent or subjected to a moist environment. SunPower flexible panels are the #1 choice for customers due of the combination of high power and cell ruggedness.

The panel can be installed with adhesives and/or use of stainless steel grommets in the panel. The panels have standard quickconnect cables. An easy-to-follow installation guide is provided with each panel.


  • Nominal power: 110 Watts
  • Power tolerance: +6 / -3 Watts
  • Vmp: 18.8 Volts
  • Voc: 22.8 Volts
  • Imp: 5.9 Amps
  • Isc: 6.3 Amps
  • Dimensions: 1165 x 556 x 20 with junnction box (2mm without jusnction box
  • Weight:  2kg

Warranty (All models): 5 years limited power warranty of 80% of the minimum specified power rating.

If you require the kit with a full wiring kit for the Ctek charger please sellect from the options above and you will be supplied with the additional items below

You will be supplied with everything you need

1 x CTEK D250SE 20amp Charger

1-8 mtrs 10mm 70amp Red Battery Cable

2mtrs 10mm 70amp Black Battery Cable

5mtrs 1.5mm 15amp Red optional ignition cable

1 x Pair 8mm Post Type Battery Terminals

2 x Midi Fuse Holders + 4 x 30amp Midi Fuses

1 x Pack Terminals + Heat Shrink

10 x Cable tie bases

15 x cable ties 150mm

15 X 8x3/4 screws + 3mm HSS drill bit

2 x adhesive pads

1-8mtrs protective conduit to suit 10mm cable

1 x Sunpower SPE-E-Flex-110 110watt Solar Panen

1 x 5mtr Solar lead with MC4 compatible connectors

1 x White roof gland

1 x Sikaflex Adhesive

Wiring diagram

Write a review

Note: HTML is not translated!
    Bad           Good

Sunpower 110 watt Flexible Solar Panel Systems with Ctek D250SE 20amp DCDC Charger

  • Product Code: SPR110/D250SE
  • Only Ships to: UK VAT Zone
  • Availability: 1
  • £479.99

  • Ex Tax: £399.99

Available Options