Split Charge Kit with 12V 180amp VSR + Ready Made Leads

Product Details

Professional, heavy duty, voltage sense split charge relay system, suitable for charging up to 250ah leisure battery(s) in industrial vehicles or with high output alternators needing a high capacity charging system for high drain equipment. supplied with ready made leads for a simple installation.

Suitable for all 4 x 4's, day vans, campers, motor homes and mobile workshops especially if using high power motors, winces, amps or inverters.

A very simple kit to install, all you need to do is to connect your starter battery to your leisure battery(s) by using the kit supplied, with the easy to understand fitting instructions and a wiring diagram.

The voltage sense relay simply detects the rise in voltage from you vehicles charging system to allow you to charge your leisure battery(s) while your engine is running. When your engine is switched off, the relay will isolate your leisure battery(s) from your main starter battery. So it does not drain your main starter battery and you will always be able to start your vehicle.

You will be supplied with everything you need to fit this kit

• 12V 180amp Cargo Voltage sense Split Charge Relay including terminal covers

• 1 x 250mm 170amp 25mm2 Red lead from starter battery to fuse holder ( M8 to M8 ) terminals

• 1 x 250mm 170amp 25mm2 Red lead fuse holder to relay ( M8 to M8 ) terminals

• 1 x 250mm-7250mm 170amp 25mm2 Red lead Relay to fuse holder ( M8 to M8 ) terminals

• 1 x 250mm 170amp 25mm2 Red lead fuse holder to leisure battery ( M8 to M8 ) terminals

• 1 x 1000mm 170amp 25mm2 Black lead from Leisure battery to earth ( M8 to M10 ) terminals

• 1 x pair M8 post type battery terminals + battery terminal covers

• 2 x Mega Fuse holders & Mega 150A Fuses including a spare.

• Spare crimp terminals + heat shrink for any modifications needed.

• 15 x Cable ties + 10 x adhesive cable tie fixings to keep everything tidy.

• 15 x fixing screws

• Drill bit

• 1-8mtr Split conduit to protect cables.

• Easy to understand Fitting Instructions + after sales support if required

Additional Information

• Relay activation voltage 13.4v

• Relay isolation Voltage 12.6v

Voltage sense systems are especially suited for modern vehicles as this type of system does not need an ignition feed or any additional wiring into your vehicle but for modern Intelligent smart charging vehicles with Euro cat 5/6 engines you may need to use a DC to DC charger.

Our aim at Simply Split Charge is to supply you with the best, top quality Split Charge kit available, at the best price we can. All the components in all of our split charge relay Systems are all fully E-approved and Tested top quality UK supplied parts. In all of our kits you will find everything you need plus spares to install any split charge system to any vehicle with our help and support if required 

In all of our kits you will find everything you need plus spares to install any split charge system to any vehicle with our help and support if required.